Testsealabs Multi-Drug 2-12 Drug Screen rapid test kit
| Product Name |
Multi-Drugs Screen Test Panel |
| Specimen |
Urine |
| Item |
THC, MET, KET, BZO, MDMA, COC, COT, AMP, BAR, MOP, OXY, K2, MTD, PCP, BUP, FYL, MQL, TML, EDDP..... |
| Storage |
4-30ºC |
| Shelf life |
24 months |
| Format |
Cassette / Panel / Cup |
| Package |
25pcs/box |
| Certificate |
CE & ISO |
| MOQ |
1000pcs |
| Brand |
Testsealabs |
| Origin |
China |
Intended Use
A rapid, one step screening rapid test for the simultaneous, qualitative detection of multiple drugs and drug metabolites in human urine.
For healthcare professionals including professionals at point of care sites.
For in vitro diagnostic use only.
The configurations of the One Step Multi-Drug Screen Rapid Test Card come with any combination of the above listed drug analytes. This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) is the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are used.
Test Procedure:
Allow the test device, urine specimen, and/or controls to equilibrate to room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test card from the sealed pouch and use it as soon as possible. Remove the cap from the end of the test card. With arrows pointing toward the urine specimen, immerse the strip(s) of the test card vertically in the urine specimen for at least 10-15 seconds. Immerse the test card to at least the level of the wavy lines on the strip(s), but not above the arrow(s) on the test card. See the illustration below.
2. Place the test card on a non-absorbent flat surface, start the timer and wait for the red line(s) to appear. The results should be read at 5 minutes. Do not interpret results after 10 minutes
How To Read Results:
NEGATIVE:* Two lines appear. One red line should be in the control region (C), and another apparent red or pink line adjacent should be in the test region (T). This negative result indicates that the drug concentration is below the detectable level.
*NOTE: The shade of red in the test line region (T) will vary, but it should be considered negative whenever there is even a faint pink line.
POSITIVE: One red line appears in the control region (C). No line appears in the test region (T). This positive result indicates that the drug concentration is above the detectable level.
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test using a new test panel. If the problem persists, discontinue using the lot immediately and contact your local distributor.
FAQs:
Q: What are your price?
A: Our price are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Q: Do you have a minimum order quantity?
A : Yes, our MOQ is 1000pcs.
But for new customers, the trial order quantity can lower than our MOQ, you can feel free to contact us for trial orders.
Q: Can you supply the relevant documentation?
A: Yes, we can provide most documentation including certificates and other export documents where required.
Q: Can you make OEM or ODM service?
A: Yes. We can accept OEM service. Meanwhile it's also welcome to choose our ODM products.
Audited Supplier 
){kind=link}