Testsealabs Flu A/B Antigen Rapid Test
Intended Use:
The Influenza A&B Rapid Test Cassette is a rapid chromatographic immunoassay for the qualitative detection of influenza A and B antigens in nasal swab specimens. It is intended to aid in the rapid differential diagnosis of influenza A and B viral infections.
Test Procedure:
Allow the test, specimen, extraction buffer to equilibrate to room temperature (15-30°C) prior to testing.
1. Remove the test from the foil pouch and use it as soon as possible.
2. Place the Extraction Tube in the workstation. Hold the extraction reagent bottle upside down vertically. Squeeze the bottle and let the solution drop into the extraction tube freely without touching the edge of the tube. Add 10 drops of solution to the Extraction Tube.
3. Place the swab specimen in the Extraction Tube. Rotate the swab for approximately 10 seconds while pressing the head against the inside of the tube to release the antigen in the swab.
4. Remove the swab while squeezing the swab head against the inside of the Extraction Tube as you remove it to expel as much liquid as possible from the swab. Discard the swab in accordance with your biohazard waste disposal protocol.
5. Cover the tube with cap,then add 3 drops of the sample into the sample hole vertically.
6. Read the result after 15 minutes. If left unread for 20 minutes or more the results are invalid and a repeat test is recommended.
INTERPRETATION OF RESULTS:
POSITIVE Influenza A:* Two distinct colored lines appear. One line should be in the control line region (C) and another line should be in the Influenza A region (A). A positive result in the Influenza A region indicates that Influenza A antigen was detected in the sample.
POSITIVE Influenza B:* Two distinct colored lines appear. One line should be in the control line region (C) and another line should be in the Influenza B region (B). A positive result in the Influenza B region indicates that Influenza B antigen was detected in the sample.
POSITIVE Influenza A and Influenza B: * Three distinct colored lines appear. One line should be in the control line region (C) and the other two lines should be in the Influenza A region (A) and Influenza B region (B). A positive result in the Influenza A region and Influenza B region indicates that Influenza A antigen and Influenza B antigen were detected in the sample.
*NOTE: The intensity of the color in the test line regions (A or B) will vary based on the amount of Flu A or B antigen present in the sample. So any shade of color in the test regions (A or B) should be considered positive.
NEGATIVE: One colored line appears in the control line region (C). No apparent colored line appears in the test line regions (A or B). A negative result indicates that Influenza A or B antigen is not found in the sample, or is there but below the detection limit of the test. The patient's sample should be cultured to make sure that there is no Influenza A or B infection. If the symptoms do not agree with the results, get another sample for viral culture.
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor
FAQ:
Q1. Can i get the samples?
A: yes, sure, we can provide the free samples.
Q2. How can I get a price of needed product?
A: Just feel free to contact us, send the quantity and products name to us, then we will give the quotation to you.
Q3. How can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q4. what can you buy from us?
A: Infectiouse disease Rapid test,
DOA rapid test,
Hormone rapid test,
Tumor markers rapid test,
Cardiac markers rapid test,
Veterinary diagnostic rapid test.
Q5. why should you buy from us not from other suppliers?
A: High-tech enterprise , specialized in the research, development productio and sales of raw materials, more than 56000 square meters including 2000 square meters of GMP100 000-level purification workshop , follow with ISO management system.
Professional R & D team has more than 10 years experience.
With CE & ISO certificates.
Q6. I am a small wholesaler, do you accept small order?
A: It's no problem if you are a small wholesaler, we would like to grow up with you together.
Q7. Lead time?
A: For mass production, we deliver by batches and first batch can be delivered within 7 days.
Q8. Can you make OEM or ODM service?
A: Yes. We can accept OEM service. Meanwhile it's also welcome to choose our ODM products.
Audited Supplier 
){kind=link}
){kind=link}