Testsealabs CEA Carcinoembryonic Antigen Rapid Test Kit
Intended use:
The One Step CEA Carcinoembryonic Antigen Rapid Test (Whole Blood/Serum/Plasma) is a rapid chromatographic immunoassay for the qualitative detection of CEA in whole blood, serum or plasma to aid in monitoring of cancer patients
Test procedure:
Allow the test, specimen, buffer, and/or controls to reach room temperature (15 30°C) prior to testing.
- Bring the pouch to room temperature before opening it. Remove the test device from the foil pouch and use it as soon as possible. Best results will be obtained if the test is performed immediately after opening the foil pouch.
- Place the test device on a clean and level surface.
For Serum or Plasma specimens: Hold the dropper vertically and transfer 1 drop of serum or plasma (approximately 25 mL) to the specimen well (S) of the test device, then add 1 drop of buffer (approximately 40 mL) and start the timer. See illustration below.
For Venipuncture Whole Blood specimens: Hold the dropper vertically and transfer 2 drops of venipuncture whole blood (approximately 50 mL) to the specimen well (S) of the test device, then add 1 drop of buffer (approximately 40 mL) and start the timer. See illustration below.
For Fingerstick Whole Blood specimens:
- To use a capillary tube: Fill the capillary tube and transfer approximately 50 mL of fingerstick whole blood to the specimen well (S) of the test device, then add 1 drop of buffer (approximately 40 mL) and start the timer. See illustration below.
- To use hanging drops: Allow 2 hanging drops of fingerstick whole blood (approximately 50 mL) to fall into the center of the specimen well (S) on the test device, then add 1 drop of buffer (approximately 40 mL) and start the timer. See illustration below.
- Wait for the colored line(s) to appear. Read results at 10 minutes. Do not interpret results after 20 minutes.
INTERPRETATION OF RESULTS
Positive: Two lines appear. One line should always appear in the control line region(C), and another one apparent colored line should appear in the test line region.
Negative: One colored line appears in the control region(C).No apparent colored line appear in the test line region.
Invalid: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test device. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
FAQs:
Q: What are your price?
A: Our price are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Q: Do you have a minimum order quantity?
A : Yes, our MOQ is 1000pcs.
But for new customers, the trial order quantity can lower than our MOQ, pls feel free to contact us to order trial orders.
Q: Can you supply the relevant documentation?
A: Yes, we can provide most documentation including certificates and other export documents where required.
Q: Can you make OEM or ODM service?
A: Yes. We can accept OEM service. Meanwhile it's also welcome to choose our ODM products.
Audited Supplier 
){kind=link}
){kind=link}